Yamaha YDP-141 Owner's Manual - Page 30

MIDI Functions, MIDI Transmit/Receive Channel Selection, Local Control ON/OFF - demo songs

Page 30 highlights

ENGLISH MIDI Functions You can make detailed adjustments to MIDI settings. MIDI Transmit/Receive Channel Selection In any MIDI control setup, the MIDI channels of the transmitting and receiving equipment must be matched for proper data transfer. This parameter enables you to specify the channel on which the digital piano transmits or receives MIDI data. Setting the transmit channel While holding down the [DEMO/SONG] and [PIANO/VOICE] buttons simultaneously, press one of the C1-E2 keys. Setting the receive channel While holding down the [DEMO/SONG] and [PIANO/VOICE] buttons simultaneously, press one of the C4-F5 keys. E2 C1 D2 C4 E5 F5 In Dual mode, Voice 1 data is transmitted on its specified channel and Voice 2 data is transmitted on the next greater channel number relative to the specified channel. In this mode, no data is transmitted if the transmit channel is set to "OFF." The lowest key 2 4 7 9 11 14 16 1 3 5 6 8 101213 15 For setting the transmit channels. (C1-D 2) OFF 2 4 7 9 11 14 16 1 3 5 6 8 1012 1315 1+2 For setting the receive channels. (C4-F5) ALL Program change and other like channel messages received will not affect this instrument's panel settings or the notes you play on the keyboard. MIDI receive channel is ALL: A "Multi-timbre" Receive mode is available. In this mode, this instrument receives different parts from the connected MIDI device on any or all 16 MIDI channels and plays multi-channel song data. MIDI receive channel is 1+2: A "1+2" Receive mode is available. It allows simultaneous reception on channels 1 and 2 only, enabling this instrument to play 1 and 2 channel song data received from a music computer or sequencer. Data for the demo song, 50 piano preset songs and user song cannot be transmitted via MIDI. Local Control ON/OFF "Local Control" refers to the fact that, normally, the keyboard of this digital piano controls its internal tone generator, allowing the internal voices to be played directly from the keyboard. This situation is "Local Control On," since the internal tone generator is controlled locally by its own keyboard. Local control can be turned OFF, however, so that the keyboard of this digital piano does not play the internal voices, but the appropriate MIDI information is still transmitted via the MIDI [OUT] connector when notes are played on the keyboard. At the same time, the internal tone generator responds to MIDI information received via the MIDI [IN] connector. While holding down the [DEMO/SONG] and [PIANO/VOICE] buttons simultaneously, press the C6 key. Pressing the C6 key repeatedly toggles between Local Control On and Off. C6 When Local control is turned OFF, the keyboard of this instrument does not play the internal voices. Default setting: ON The highest key 30 YDP-161/141 Owner's Manual

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40

30
YDP-161/141
Owner’s Manual
ENGLISH
MIDI Functions
You can make detailed adjustments to MIDI settings.
MIDI Transmit/Receive Channel Selection
In any MIDI control setup, the MIDI channels of the transmitting and receiving equipment must be matched for proper data
transfer.
This parameter enables you to specify the channel on which the digital piano transmits or receives MIDI data.
In Dual mode, Voice 1 data is
transmitted on its specified
channel and Voice 2 data is
transmitted on the next greater
channel number relative to the
specified channel. In this
mode, no data is transmitted if
the transmit channel is set to
“OFF.”
Program change and other
like channel messages
received will not affect this
instrument’s panel settings or
the notes you play on the
keyboard.
Data for the demo song,
50 piano preset songs and
user song cannot be
transmitted via MIDI.
Setting the transmit channel
While holding down the [DEMO/SONG] and [PIANO/VOICE] buttons simultaneously, press
one of the C1–E2 keys.
Setting the receive channel
While holding down the [DEMO/SONG] and [PIANO/VOICE] buttons simultaneously, press
one of the C4–F5 keys.
Local Control ON/OFF
“Local Control” refers to the fact that, normally, the keyboard of this digital piano controls its internal tone generator,
allowing the internal voices to be played directly from the keyboard. This situation is “Local Control On,” since the internal
tone generator is controlled locally by its own keyboard.
Local control can be turned OFF, however, so that the keyboard of this digital piano does not play the internal voices, but
the appropriate MIDI information is still transmitted via the MIDI [OUT] connector when notes are played on the keyboard.
At the same time, the internal tone generator responds to MIDI information received via the MIDI [IN] connector.
When Local control is turned
OFF, the keyboard of this
instrument does not play the
internal voices.
Default setting: ON
While holding down the [DEMO/SONG] and [PIANO/VOICE] buttons
simultaneously, press the C6 key.
Pressing the C6 key repeatedly toggles between Local Control On and Off.
MIDI receive channel is ALL:
A “Multi-timbre” Receive mode is available. In this mode, this instrument receives
different parts from the connected MIDI device on any or all 16 MIDI channels and
plays multi-channel song data.
MIDI receive channel is 1+2:
A “1+2” Receive mode is available. It allows simultaneous reception on channels 1
and 2 only, enabling this instrument to play 1 and 2 channel song data received from a
music computer or sequencer.
1 3 5 6 8 10
2
4
7
9
1
1
14 16
121315
1 3 5 6 8 10
2
4
7
9
1
1
14 16
121315
1+2
For setting the
transmit channels.
(C1
D
±
2)
For setting the
receive channels.
(C4
F5)
D
±
2
C1
E2
C4
E5
F5
ALL
OFF
The lowest key
C6
The highest key