Yamaha YDP-223 Owner's Manual - Page 11
Turning the Power On, Setting the Volume - no sound
View all Yamaha YDP-223 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 11 highlights
Turning the Power On 1. Connect the power cord. Insert the plugs at the ends of the cord, one into the AC INLET on the YDP-223, and the other into a standard AC outlet. In some areas, a plug adaptor may be provided to match the pin configuration of the AC wall outlets in your area. 1 2 ENGLISH (bottom surface) (The shape of plug differs depending on locale.) 2. Turn the power on. Press the [POWER] button. • The display located in the center of the front panel and the power indicator located below the left end of the keyboard lights up. Power indicator [POWER] Display Normally indicates tempo. When you're ready to turn off the power, press the [POWER] button again. • The display and the power indicator turn off. TIP Power indicator If you close the key cover without turning the power off, the power indicator remains lit, indicating that the power is still on. Setting the Volume Initially set the [MASTER VOLUME] control about halfway between the "MIN" and "MAX" settings. Then, when you start playing, re-adjust the [MASTER VOLUME] control to the most comfortable listening level. MIN MAX The level decreases. MASTER VOLUME The level increases. CAUTION Do not use the YDP-223 at a high volume level for a long period of time, or your hearing may be damaged. TERMINOLOGY MASTER VOLUME: The volume level of the entire keyboard sound TIP You can also adjust the [PHONES] output level and the AUX IN input level using the [MASTER VOLUME] slider. YDP-223 Before Using the YDP-223 11