Yamaha YDP-C71PE Owner's Manual - Page 23
Changing the Initial Settings of the Recorded Song, Deleting Recorded Data
View all Yamaha YDP-C71PE manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 23 highlights
ENGLISH 5 If desired, record the other Part by repeating Steps 1-4. 6 To hear the recorded Song, Press [PLAY] to start playback. Press [PLAY] again to stop playback. Advanced Functions NOTE The recorded Song data can be saved to computer as a Standard MIDI file (SMF). For instructions, refer to the Computer-related Operations manual. Changing the Initial Settings of the Recorded Song The settings of the following parameters at the Song beginning can be changed after the Record operation is completed. - For individual Parts: Voice, Dual Voices, Reverb depth, Damper/Soft Pedal depth - For the entire Song: Tempo, Reverb Type 1 Make the settings of the above parameters. 2 While holding down [REC], press the desired Part button to engage Record Ready mode. In this status, do not press [PLAY] again or any key. Otherwise, the originally recorded performance data will be deleted. 3 Press [REC] again to exit from Record Ready mode. Deleting Recorded Data To delete the entire Song: 1 Press [REC] to engage Record Ready mode. The [REC] and [+ R] lamps flash. 2 While holding down [PLAY], press [REC]. The [REC], [PLAY], [+ R] and [- L] lamps flash. To exit from this status, press any other button such as [DEMO/SONG]. 3 Press [REC], [PLAY], [+ R] or [- L] to delete the data of the entire Song. After the operation is completed, all lamps turn off. To delete a specific Part: 1 While holding down [REC], press [+ R] or [- L] for the Part you want to delete to engage Record Ready mode. The [REC] and the selected Part ([+ R] or [- L]) lamps flash. 2 Press [PLAY] to start recording without playing the keyboard. The selected Part ([+ R] or [- L]) lamp flashes. 3 Press [REC] or [PLAY] to stop recording. All data recorded for the selected Part will be deleted, and the lamp turns off. YDP-C71 Owner's Manual 23