Yamaha YHT-185 Installation Guide - Page 1
Yamaha YHT-185 Manual
![]() |
View all Yamaha YHT-185 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 1 highlights
YHT-185 Digital Home Theater System En System Connection Guide Yamaha created this package to greatly enhance your audio and home theater enjoyment. This System Connection Guide will help you get started. Follow the steps to connect the speakers first. Then connect your video monitor, DVD Player and other components. Refer to your Owner's Manuals as well as those that came with your other components for complete instructions and precautions. Be sure that all components are not plugged in while making connections. 4 HTR-6030 © 2007 GARK All rights reserved. Printed in China WJ99940 STEP 2: Connect other home theater components (optional) CAUTION Components must not be plugged in while connecting them. Wait until all connections are made before plugging in your components. 1 ANT. VIDEO S-VIDEO STEP 1: Unpack and connect speakers 1 12 5 6 NX-E270 7 NX-C270 34 NX-E270 HTR-6030 SW-P270 Inspect contents After unpacking, inspect the contents to confirm you have the above items: NX-E270 two front speakers (1, 2), NX-E270 two surround speakers (3, 4), NX-C270 one center speaker (5), SW-P270 powered subwoofer (6), HTR-6030 AV Receiver (7) with remote control. Also included, but not shown, are five speaker wires, one subwoofer cable, AM and FM antennas, fasteners, non-skid pads, and three related Owner's Manuals. 2 16 2 5 4 1 Front right speaker 2 Front left speaker 3 Surround right speaker 4 Surround left speaker 3 5 Center speaker 6 Subwoofer To the front right speaker (1) To the front left speaker (2) Connect front speakers Connect speaker wires for front speakers (1, 2). The positive (+) side of the wire with the white stripe attaches to the red terminal. The negative (-) side attaches to the black terminal. CAUTION Receiver must not be plugged in while connecting speakers. 5 HTR-6030 HTR-6030 Video monitor Connect a video monitor Connect the MONITOR OUT jack of the receiver and the video input jack of your video monitor using an RCA video cable (not included). 2 To the surround right speaker (3) To the center speaker (5) To the surround left speaker (4) Connect surround and center speakers Connect speaker wire for surround speakers (3, 4) and center speaker (5). The positive (+) side of the wire with the white stripe attaches to the red terminal. The negative (-) side attaches to the black terminal. CAUTION Receiver must not be plugged in while connecting speakers. 6 HTR-6030 HTR-6030 DVD player Connect a DVD player (video) Connect the DVD VIDEO IN jack of the receiver and the video output jack of your DVD player using an RCA video cable (not included). 3 Place speakers Place speakers so they appear in the approximate positions as shown in the diagram above. See your Owner's Manual for more information on speaker placement and mounting. 3 70 mm Connect the subwoofer SW-P270 Connect the subwoofer cable to the subwoofer (6). Set subwoofer VOLUME control to half-way mark and POWER to OFF (rear panel). CAUTION Components must not be plugged in while connecting them. 7 HTR-6030 HTR-6030 DVD player Connect a DVD player (audio) Connect the DVD DIGITAL INPUT jack of the receiver and the digital output jack of your DVD player using a coaxial cable (not included). 4 5 AUDIO R L VIDEO IN OUT HTR-6030 DVR/VCR Connect a DVR/VCR Connect DVR IN/OUT jacks of the receiver and the input/output jacks of your component using RCA audio/video cables (not included) as shown. 6 HTR-6030 CD player Connect a CD player Connect CD jacks of the receiver and the output jacks of your CD player using RCA audio cables (not included). 7 MD/CD recorder HTR-6030 Connect an MD/CD recorder Connect MD/CD-R IN/OUT jacks of the receiver and the input/output jacks of your components using RCA audio cables (not included) as shown. 8 STEP 3: Plug in Plug in the subwoofer, receiver, DVD player and other components. Power on the receiver first, then the subwoofer and other components. Please see each of your respective Owner's Manuals for recommended guidelines and settings. NX-E270 NX-C270 Connect speaker wires Connect speaker wire for front speakers (1, 2), surround speakers (3, 4), and center speaker (5). The positive (+) side of the wire with the white stripe attaches to the red terminal. The negative (-) side attaches to the black terminal. See your Owner's Manual for more information on speaker wire connections. Connect antennas Keeping receiver unplugged, connect AM loop antenna and indoor FM antenna as shown. For more information about obtaining clear reception and grounding, see your Owner's Manual. HTR-6030 DSS/Cable/HDTV tuner box Connect a DSS/Cable/HDTV tuner box Connect the DTV/CBL jacks of the receiver and the output jacks of your set-top box using RCA audio/video cables (not included) as shown. Enjoy the Yamaha Home Theater experience • Be sure to put batteries in your remote control (see Owner's Manual for instructions). • Refer to your Owner's Manuals for each component in your system for more information. • You can simply operate the receiver by using the SCENE function (see page 4 in the Owner's Manual of HTR-6030). Now, relax and enjoy the unparalleled sound of your Yamaha Home Theater system.
![](/manual_guide/products/yamaha-yht185-installation-guide-da41542/1.png)