Yamaha YHT-800 Quick Connection Guide - Page 11

YHT-800 QU I C K -CONNECT GUIDE PROGRAMMING THE UNIVERSAL REMOTE CONTROL (CONTINUED) SETTING UP YOUR CABLE BOX (OR DSS) 1. Turn on the cable box (or DSS) and look up a setup code for your brand of cable box (or DSS) (codes are located at the back of the HTR-5550 Owner's Manual). SETTING UP OTHER COMPONENTS 1. Turn on the component (e.g., CD player, tape deck, or MD player) and look up a setup code for your brand of component. 2. On the remote control, press D-TV/CBL. CODE SET TRANSMIT POWER TV POWER AV STANDBY SYSTEM POWER CD MD/CD-R TUNER SLEEP 2. On the remote control, press the desired component button (e.g., CD or MD/CD-R). 3. Press CODE SET using a ballpoint pen or similar object. The TRANSMIT indicator LED will flash twice. DVD D-TV/CBL V-AUX 6CH INPUT VCR A B AMP 4. Using the keypad, enter the four-digit setup code. The indicator LED will flash twice after your entry. If the LED did not flash twice, repeat steps 3 and 4. 3. Press CODE SET using a ballpoint pen or similar object. The TRANSMIT indicator LED will flash twice. 4. Using the keypad, enter the four-digit setup code. The indicator LED will flash twice after your entry. If the LED did not flash twice, repeat steps 3 and 4. 5. To verify the code works, aim the remote control at the cable box (or DSS), press D-TV/CBL, and then press AV POWER . The unit should turn off. If it doesn'trespond, use another code for the same manufacturer and repeat steps 3 through 5. SETTING UP YOUR VCR 1. Turn on the VCR and look up a setup code for your brand of VCR. 5. To verify the code works, aim the remote control at the component, press the appropriate component button, and then press AV POWER. The unit should turn off. If it doesn't respond, use another code for the same manufacturer and repeat steps 3 through 5. CODE SET TRANSMIT POWER TV POWER AV STANDBY SYSTEM POWER NOTE: Your component's original remote control must have a power On/Off function in order for this remote to control your component's power function. 2. On the remote control, press VCR. CODE SET TRANSMIT POWER TV POWER AV STANDBY SYSTEM POWER CD MD/CD-R TUNER SLEEP DVD D-TV/CBL V-AUX 6CH INPUT VCR A B AMP 3. Press CODE SET using a ballpoint pen or similar object. The TRANSMIT indicator LED will flash twice. 4. Using the keypad, enter the four-digit setup code. The indicator LED will flash twice after your entry. If the LED did not flash twice, repeat steps 3 and 4. 5. To verify the code works, aim the remote control at the VCR, press VCR, and then press AV POWER. The VCR should turn off. If it doesn't respond, use another code for the same manufacturer and repeat steps 3 through 5. 11