Yamaha YM-410D Owner's Manual - Page 8

YM-460/460F/410/410F/46/41 ASSEMBLY 1-2. YM-460/460F/46: Connect the reinforcement stays at the center. Align the end of the fixing bolt and the holes in the reinforcement stays and tighten the fixing bolt securely. * Insert the support using the reference hole close to the hole for the screw as a guide. Reinforcement stay (Large end) Screw hole Reference hole Reinforcement stay (Small end) 1-3. Insert the reinforcement stay with its notch facing up into the lower joint of the large end leg as far as it will go (aligning the notch with the fixing bolt) and tighten the fixing bolt securely. (A mark "E" is printed on the reinforcement stay and the large end joint.) Leg (Large end) Fixing bolt Tighten Fixing bolt & Leg Notch & Reinforcement stay Notch Reinforcement stay 1-4. In the same way, install the reinforcement stay to the small end leg. (There is no marking on the small end joint.) 28