Yamaha YSP-5100BL Quick Reference Guide - Page 4

2 Connecting external components to this unit Example - B This example shows a way to connect a TV and Blu-ray disc player using the supplied cables. You can enjoy the multi-channel audio from the Blu-ray disc player and the analog/digital audio from the TV. Use the video pin cable supplied with your Blu-ray disc player to make a video connection between your Blu-ray disc player and this unit. Video input 1 1 TV Connect cables in the order of the circled numbers. Supplied Blu-ray disc player 1 Video pin cable (to display this unit's menu screen on the TV) Analog audio Optical digital output R L output Video input 2 Video output Coaxial digital output 2 SUB COMPONENT WOOFER Video connection 3 SIRIUS SYSTEM CONNECTOR 1. Pull out the cap (if attached) 4 2. Check the direction IN OUT AUX 1 TV AUX 2 VIDEO AUDIO IN AUX 1 TV DIGITAL IN IR IN Audio connection RS-232C System connection (supplied with Yamaha subwoofer) 2 Audio pin cable (to play back TV analog sounds on this unit) 3 Optical cable (to play back TV digital sounds on this unit) 4 Digital audio pin cable (to input digital audio signals of the Blu-ray disc to this unit) 5 Power cable Subwoofer This unit To AC wall outlet • If you make a system connection, the power of the subwoofer automatically changes in conjunction with the power of this unit (Yamaha subwoofer). • If you connect a subwoofer by wireless, refer to "Wireless connection for subwoofer" described in the left section. Do not plug the power cable 5 into an AC wall outlet until all connections are complete. 3 Preparing the remote control Install batteries in the remote control. Make sure you insert the batteries according to the polarity markings (+/-). Pull the tab Operation range Within 6 m (20 ft) 30° 30° INPUT VOLUME INTELLIBEAM MIC 1 2 3 4 5 6 7 8 9 10/0 ஍σδ #4 11/+10 12 ஍Ξφ $4 Remote control -  -