Yamaha YSP-600 Owner's Manual - Page 51

■ Decoder indicators Depending on the input source and the selected surround mode, the decoder indicators in the front panel display light up as follows: Status Indicator When PCM signals are being input PCM When DTS digital signals are being input or DTS Neo:6 is selected as the surround mode When Dolby Digital signals are being input DIGITAL When Dolby Pro Logic is selected as the surround mode PL When Dolby Pro Logic II is selected as the surround mode PL y • You can select an input mode (AUTO, DTS, or ANALOG) by pressing INPUTMODE repeatedly (see page 73). • Discs encoded in DTS-ES, Dolby Digital 5.1 EX, Dolby Digital EX, or Dolby Digital Surround EX will be played back in DTS or Dolby Digital. Enjoying surround sound ■ Surround modes and recommended sources Surround mode DTS Neo:6 Dolby Pro Logic Dolby Pro Logic II Cinema Music - Movie Music Game Recommended source Movies Music All sources Movies Music Games Notes • When you select an input source (see page 42), the surround mode used for the previously selected input source is automatically selected. • If the power of this unit is turned off and on again, the surround mode used for the previously selected input source before the power was turned off is automatically selected. • If the surround modes are not available, "Prohibit" appears in the front panel display when you press SUR. DECODE. • The surround modes are available: - when the beam mode is set to a setting other than the stereo playback (see page 51), My Beam (see page 52), and My Surround (see page 46). - when 2-channel signals are being input. BASIC OPERATION English 47 En