Yamaha YSV104 YSV104_Owners Manual_EN - Page 8

q Volume control (instrument) Adjusts the instrument's output level volume to the proprietary Control box. NOTE • If the sound is distorted, rotate the Volume control dial to the left. w Jack (connect to Control box) This jack is used to receive power from the Control box and transmit the audio signal from the instrument to the Control box. Use the supplied cable to connect the instrument to the "Instrument jack" ( ) on the Control box. * A commercially available audio cable with stereo mini plugs on both ends can also be used. (Cables with resistors are not compatible.) * The system will not operate properly if a monaural cable is used. * The system will not operate properly if the cable is attached to anything other than the Control box. Connection example Stereo earphones Audio player, etc. To external audio device (mixer, amplifier, etc.) Main unit Control box CAUTION • Connect or disconnect the cable between the Silent Violin and the Control box only after the Control box power is switched OFF. • When connecting the Silent Violin's Control box to an external device, make sure that the power is switched OFF on all devices, or that the volume on all devices is set to the minimum level. Loud volume levels can damage your hearing, and damage the equipment. • When making connections to external devices, make sure that the proper plugs are used and securely connected. EN 7