Yamaha YV-520 Owner's Manual - Page 14
Attach the resonators.
View all Yamaha YV-520 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 14 highlights
ASSEMBLY: YV-3910/3710/3700 3-3 z Loosen the center rod fixing bolts to extend the center rod. x Connect the center rod with the fitting of the rod connector by firmly holding the center rod while turning the rod connector. c Tighten the rod connector until it stops, and then secure with the lock nut. z Loosen Center Rod Fixing Bolt Rod Connector x Turn (screw on) Lock Nut c Secure Center Rod Knurled Part z Loosen Pedal Rod v Attach the resonators. 4-1 Insert the resonators from underneath the frame and rest the high sound side and then the low sound side onto the resonator holders (rubber). * Make sure not to confuse the natural tone side and accidental tone side resonators. * Take care not to bump the resonators against the legs etc. Low Sound Side z x High Sound Side Accidental Tone Side Resonators 2 To engage the low sound side, lift it over the resonator holders and then insert it into the gap between the two holders, as shown in the illustration. 1 First, place the high sound side onto the corre- sponding resonator holders. Resonator Holders Resonator Holders 12