Yamaha YWA-10 YWA-10 Wireless Network Adapter Quick Setup Guide - Page 1
Yamaha YWA-10 Manual
View all Yamaha YWA-10 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 1 highlights
YWA-10 Wireless Network Adapter - Quick Setup Guide The YWA-10 Wireless Network Adapter can be used to connect the RX-V773 to a wireless home network. This Quick Setup Guide walks you through using Wi-Fi Protected Setup (WPS) to automatically configure the YWA-10 to your home network. If your wireless router does not support WPS or you need additional help, please refer to the YWA-10 Owner's Manual or visit http://4wrd.it/YWAHELP 1. Connecting the YWA-10 to the RX-V773 a. Connect the supplied USB power cable to the YWA-10 and the RX-V773 back panel DC OUT 5V-0.5A USB power port. b. Power ON the RX-V773 and wait for one minute after the green power light on the YWA-10 is lit, then proceed to step 2. Rear Panel AV Receiver RX-V773 3. Checking Network Connectivity Once the YWA-10 is connected to the RX-V773, you can test internet connectivity by going to the Net Radio input and selecting a station. a. Press the Net button on the receiver remote repeatedly until Net Radio is displayed. b. If the On-Screen Display shows Bookmarks, Locations, Genres, etc. you are successfully connected to the internet. AV Receiver RX-V773 2. Connecting the YWA-10 to your wireless network a. Press the WPS button on your wireless router. b. Press and hold down the WPS button on the rear of the YWA-10 for 10 seconds or until the WPS indicator light turns solid. Press WPS button Wireless router Press and hold for 10 seconds or until the WPS light turns solid. YWA-10 Modem c. Remove your finger from the WPS button and wait for the WPS light to go out. This can take up to 2 minutes. Note: If the WPS indicator blinks, disconnect power of the YWA-10 and start over at Step 1. d. Connect the supplied Network cable from the YWA-10 to the Network port on the RX-V773. Rear Panel AV Receiver RX-V773 Internet connection Wireless router Notes: If your wireless router does not support WPS or if you need additional help, please refer to the YWA-10 Owner's Manual or visit http://4wrd.it/YWAHELP The Wi-Fi CERTIFIED Logo is a certification mark of the Wi-Fi Alliance. The Wi-Fi Protected Setup Mark is a mark of the Wi-Fi Alliance. YWA10BL QSG 0-27108-10770-7