Zanussi ZCG63250BA User Manual - Page 9
Hob - Hints And Tips
View all Zanussi ZCG63250BA manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 9 highlights
BURNER OVERVIEW G F A. Burner cap A B. Burner crown C. Slots D. Thermocouple E. Ignition candle F. Burner body B G. Hole for the ignition candle C D E REPLACING BURNER PARTS 1. Put carefully the burner crown on the burner body. Let the crown fall freely onto the body. Do not use force. Make sure that the hole in the crown is above the ignition candle. Make sure that the location pegs are in the slots in the burner body. Make sure that you can move the crown a small distance from side to side. 2. Put the burner cap centrally on top of the crown. Make sure that the cap is correctly installed, with the enamel side up and you can move the cap from side to side and front to back. 3. Light the burner. If the burner does not ignite, adjust the crown and cap again. HOB - HINTS AND TIPS TURNING THE BURNER OFF To put the flame out, turn the knob to the off position . WARNING! Always turn the flame down or switch it off before you remove the pans from the burner. LID SAFETY DEVICE Lid has safety device, which cuts off the gas supply for the hob. Closing the lid activates the safety device. WARNING! Always use the knob for the hob to switch off a burner. Do not use the lid as a cut-off device. WARNING! Refer to Safety chapters. COOKWARE WARNING! Do not put unstable or damaged pots on the burner to prevent spills and injuries. CAUTION! Make sure that pot handles are not above the front edge of the cooktop. CAUTION! Make sure that the pots are placed centrally on the burner in order to get the maximum stability and a lower gas consumption. DIAMETERS OF COOKWARE WARNING! Use cookware with diameters applicable to the size of burners. 9