Zanussi ZDF26004XA User Manual - Page 6

PROGRAMMES Programme Degree of soil Type of load Programme phases Consumption values 1) Duration (min) Energy (kWh) Water (l) 2) 3) 4) 5) Normal soil Crockery and cutlery All Crockery, cutlery, pots and pans Heavy soil Crockery, cutlery, pots and pans Fresh soil Crockery and cutlery All • Pre-wash • Wash 50 °C • Rinses • Dry • Pre-wash • Wash from 45 °C to 70 °C • Rinses • Dry • Pre-wash • Wash 70 °C • Rinses • Dry • Wash 60 °C or 65 °C • Rinses • Pre-wash 227 45 - 156 155 170 30 14 1.039 0.7 - 1.4 1.5 - 1.7 0.8 0.1 11 7 - 12 14-15 10 5 1) The pressure and the temperature of the water, the variations of the mains supply, the options and the quantity of dishes can change the values. 2) With this programme you have the most efficient use of water and energy consumption for crockery and cutlery with normal soil. (Also, it is a standard programme for test institutes). 3) The appliance senses the degree of soil and the quantity of items in the baskets to adjust the temperature and the quantity of the water and to control the energy consumption and the programme duration. 4) With this programme you can wash a load with fresh soil. It gives good washing results in a short period of time. 5) Use this programme to quickly rinse the dishes and to prevent the food remains from drying out on the dishes and to reduce bad odour coming out from the appliance. Do not use detergent with this programme. SETTINGS PROGRAMME SELECTION MODE In the programme selection mode it is possible to set a washing programme and to enter the user mode to change the appliance settings. To enter the programme selection mode, press on/ off. The appliance is in programme selection mode when programme indicator flashes and the display shows the programme duration. If the control panel does not indicate that the appliance is in programme selection mode, implement the CANCEL procedure. 6