Zanussi ZDF3023S Product Manaul - Page 12

The washing results and drying results are not satisfactory

Get Zanussi ZDF3023S PDF manuals and user guides View all Zanussi ZDF3023S manuals
Add to My Manuals
Save this manual to your list of manuals

Page 12 highlights

Problem The appliance does not fill with water. The appliance does not drain the water. Possible cause The appliance door is open. You did not press Start. The fuse in the fuse box is damaged. The delay start is set. The water tap is closed. Possible solution Close the appliance door. Press Start. Replace the fuse. Cancel the delay start or wait for the end of the countdown. Open the water tap. The water pressure is too low. The water tap is clogged or there is limescale on it. The filter in the water inlet hose is clogged. The water inlet hose has a kink or a bend. The anti-flood device is on. There are water leakages in the appliance. The sink spigot is clogged. Contact your local water authority. Clean the water tap. Clean the filter. Make sure that the position of the hose is correct. Close the water tap and contact the Service. Clean the sink spigot. The water drain hose has a kink or a Make sure that the position of the bend. hose is correct. After the checks are completed, turn the programme knob until the programme marker is aligned with the programme that was in operation when the problem occurred. The programme continues from the point of interruption. If the problem occurs again, contact the Service. If the display shows other alarm codes, contact the Service. The washing results and drying results are not satisfactory Problem The dishes are not clean. Possible cause The filters are clogged. The filters are not correctly assembled and installed. The spray arms are clogged. The programme was not applicable for the type of load and soil. Incorrect position of the items in the baskets. Water could not wash all items. Possible solution Clean the filters. Make sure that the filters are correctly assembled and installed. Remove remaining soil with a thin pointed object. Make sure that the programme is applicable for the type of load and soil. Make sure that the position of the items in the baskets is correct and that the water can easily wash all items. 12 www.zanussi.com

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
Problem
Possible cause
Possible solution
The appliance door is open.
Close the appliance door.
You did not press
Start
.
Press
Start
.
The fuse in the fuse box is damaged.
Replace the fuse.
The delay start is set.
Cancel the delay start or wait for the
end of the countdown.
The appliance does not fill
with water.
The water tap is closed.
Open the water tap.
The water pressure is too low.
Contact your local water authority.
The water tap is clogged or there is
limescale on it.
Clean the water tap.
The filter in the water inlet hose is
clogged.
Clean the filter.
The water inlet hose has a kink or a
bend.
Make sure that the position of the
hose is correct.
The anti-flood device is on. There are
water leakages in the appliance.
Close the water tap and contact the
Service.
The appliance does not
drain the water.
The sink spigot is clogged.
Clean the sink spigot.
The water drain hose has a kink or a
bend.
Make sure that the position of the
hose is correct.
After the checks are completed, turn the pro-
gramme knob until the programme marker is
aligned with the programme that was in opera-
tion when the problem occurred. The pro-
gramme continues from the point of interrup-
tion.
If the problem occurs again, contact the Serv-
ice.
If the display shows other alarm codes, contact
the Service.
The washing results and drying results are not satisfactory
Problem
Possible cause
Possible solution
The dishes are not clean.
The filters are clogged.
Clean the filters.
The filters are not correctly assem-
bled and installed.
Make sure that the filters are correctly
assembled and installed.
The spray arms are clogged.
Remove remaining soil with a thin
pointed object.
The programme was not applicable
for the type of load and soil.
Make sure that the programme is ap-
plicable for the type of load and soil.
Incorrect position of the items in the
baskets. Water could not wash all
items.
Make sure that the position of the
items in the baskets is correct and that
the water can easily wash all items.
12
www.zanussi.com