Zanussi ZDF36001XA User Manual - Page 12
Care And Cleaning
View all Zanussi ZDF36001XA manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 12 highlights
LOADING THE BASKETS • Use the appliance to wash dishwasher-safe items only. • Do not wash in the appliance items made of wood, horn, aluminium, pewter and copper. • Do not wash in the appliance items that can absorb water (sponges, household cloths). • Remove large food residues from dishes. • Soak cookware with burnt-on food before washing it in the appliance. • Put hollow items (cups, glasses and pans) with the opening facing downwards. • Make sure that glasses do not touch each other. • Put light items in the upper basket. Make sure that the items do not move freely. • Put cutlery and small items in the cutlery drawer. • Move the upper basket upwards to accommodate large items in the lower basket. • Make sure that the spray arms can move freely before you start a programme. BEFORE STARTING A PROGRAMME Before you start the selected programme, make sure that: CARE AND CLEANING • The filters are clean and correctly installed. • The cap of the salt container is tight. • The spray arms are not clogged. • There is enough salt and rinse aid (unless you use multi-tablets). • The arrangement of the items in the baskets is correct. • The programme is suitable to the type of load and the degree of soil. • The correct quantity of detergent is used. UNLOADING THE BASKETS 1. Let the tableware cool down before you remove it from the appliance. Hot items can be easily damaged. 2. First remove items from the lower basket, then from the upper basket. After the programme is completed, water can still remain on the inside surfaces of the appliance. WARNING! Before maintenance, deactivate the appliance and disconnect the mains plug from the main socket. CLEANING THE FILTERS Dirty filters and clogged spray arms decrease the washing results. Make a check regularly and, if necessary, clean them. B A C • Make sure that there are no residues of food or soil in or around the edge of the sump. • Put back in place the flat filter (C). Make sure that it is correctly positioned under the 2 guides. 12