Zanussi ZOHCX3X2 User Manual - Page 4
Safety Instructions
View all Zanussi ZOHCX3X2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 4 highlights
2. SAFETY INSTRUCTIONS 2.1 Installation WARNING! Only a qualified person must install this appliance. • Remove all the packaging. • Do not install or use a damaged appliance. • Follow the installation instructions supplied with the appliance. • Always take care when moving the appliance as it is heavy. Always use safety gloves and enclosed footwear. • Do not pull the appliance by the handle. • Install the appliance in a safe and suitable place that meets installation requirements. • Keep the minimum distance from other appliances and units. • Before mounting the appliance, check if the oven door opens without restraint. • The appliance is equipped with an electric cooling system. It must be operated with the electric power supply. Cabinet minimum height (Cabinet under the worktop minimum height) Cabinet width Cabinet depth Height of the front of the appliance Height of the back of the appliance Width of the front of the ap‐ pliance Width of the back of the appliance Depth of the appliance Built in depth of the appli‐ ance Depth with open door Ventilation opening mini‐ mum size. Opening placed on the bottom rear side Mounting screws 580 (600) mm 560 mm 550 (550) mm 589 mm 571 mm 595 mm 559 mm 569 mm 548 mm 1022 mm 560x20 mm 4x25 mm 2.2 Electrical connection WARNING! Risk of fire and electric shock. • All electrical connections should be made by a qualified electrician. • The appliance must be earthed. • Make sure that the parameters on the rating plate are compatible with the electrical ratings of the mains power supply. • Always use a correctly installed shockproof socket. • Do not use multi-plug adapters and extension cables. • Make sure not to cause damage to the mains plug and to the mains cable. Should the mains cable need to be replaced, this must be carried out by our Authorised Service Centre. • Do not let mains cables touch or come near the appliance door or the niche below the appliance, especially when it operates or the door is hot. • The shock protection of live and insulated parts must be fastened in such a way that it cannot be removed without tools. • Connect the mains plug to the mains socket only at the end of the installation. Make sure that there is access to the mains plug after the installation. • If the mains socket is loose, do not connect the mains plug. • Do not pull the mains cable to disconnect the appliance. Always pull the mains plug. • Use only correct isolation devices: line protecting cut-outs, fuses (screw type fuses removed from the holder), earth leakage trips and contactors. • The electrical installation must have an isolation device which lets you disconnect the appliance from the mains at all poles. The isolation device must have a contact opening width of minimum 3 mm. • This appliance is supplied without a main plug and a main cable. 4 ENGLISH