Zanussi ZWI71401WA Product Manaul - Page 7
Start Pause - integrated washing machine
View all Zanussi ZWI71401WA manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 7 highlights
lergic to detergents, and in areas where the water is very soft. Start Pause This button allows you to start or to interrupt the selected programme. Delay Start The programme can be delayed from 30 min 60 min - 90 min, 2 hours and then by 1 hour up to a maximum of 20 hours by means of this button. Door locked pilot light The pilot light 9 illuminates when the programme starts and indicates if the door can be opened: • light on: the door cannot be opened. The machine is working or has stopped with water left in the tub. • light off: the door can be opened. The programme is finished or the water has been emptied out. • light blinking: the door is opening in a few minutes. Display (10) 10.1 10.2 The display shows the following information: 10.1: Child safety lock This device permits you to leave the appliance unattended during it's functioning. 10.2: • Duration of the selected programme After selecting a programme, the duration is displayed in hours and minutes (for example ). The duration is calculated automatically on the basis of the maximum recommended load for each type of fabric. After the programme has started, the time remaining is updated every minute. • Delayed start The Selected delay set by pressing the relevant button appears on the display for a few seconds, then the duration of the selected programme is displayed again. The delay time value decreases by one unit every hour and then, when 1 hour remains, every minute. • Alarm codes In the event of operating problems, some alarm codes can be displayed, for example (see paragraph «What to do if...»). • Incorrect option selection If an option which is not compatible with the set wash programme is selected, the message Err is displayed at the bottom of the display for a few seconds. The integrated red light of button 7 starts flashing. • End of programme When the programme has finished the flashing zero ( ) is displayed. The pilot light 9 and the pilot light of button 7 go out. The door can be opened. www.zanussi.com 7