Zenith 76 Owner's Manual (English) - Page 12

Displaying Disc Information On - screen You can display various information about the disc loaded on-screen. 1. Press DISPLAY to show various playback information. The displayed items differ depending on the disc type or playing status. 2. You can select an item by pressing v / V and change or select the setting by pressing b / B. Title (Track) - Current title (or track) number/ total number of titles (or tracks). Chapter - Current chapter number/total number of chapters. Time - Elapsed playing time. Audio - Selected audio language or channel. Subtitle - Selected subtitle. Angle - Selected angle/total number of angles. Sound - Selected sound mode. Note: If any button is not pressed for a few seconds, the onscreen display disappears. LANGUAGE LANGUAGE OSD Disc Audio Disc Subtitle Disc Menu English Original Off Original Move Select OSD Select a language for the Setup menu and then onscreen display. Disc Audio / Subtitle / Menu Select the language you prefer for the audio track (disc audio), subtitles, and the disc menu. Original - Refers to the original language in which the disc was recorded. Other - To select another language, press numeric buttons and then ENTER to enter the corresponding 4-digit number according to language code list on the page 25. If you enter the wrong language code, press CLEAR. Initial Settings By using the Setup menu, you can make various adjustments to items such as picture and sound. You can also set a language for the subtitles and the Setup menu, among other things. For details on each Setup menu item, see the pages 12 to 14. To display and exit the Menu: Press SETUP to display the menu. A second press of SETUP will take you back to the initial screen. To go to the next level: Press B on the remote control. To go back to the previous level: Press b on the remote control. DISPLAY DISPLAY TV Aspect Display Mode 16 : 9 Widescreen Move Select TV Aspect 4:3 - Select when a standard 4:3 TV is connected. 16:9 - Select when a 16:9 wide TV is connected. GENERAL OPERATION 1. Press SETUP. The Setup menu appears. 2. Use v / V to select the desired option then press B to move to the second level. The screen shows the current setting for the selected item, as well as alternate setting(s). 3. Use v / V to select the second desired option and then press B to move to the third level. 4. Use v / V to select the desired setting then press ENTER to confirm your selection. Some items require additional steps. 5. Press SETUP or PLAY to exit the Setup menu. Display Mode The display Mode setting works only when the TV Aspect mode is set to "4:3". Letterbox - Displays a wide picture with bands on the upper and lower portions of the screen. Panscan - Automatically displays the wide picture on the entire screen and cuts off the portions that do not fit. 12