Zenith C30W46 Operating Guide - Page 18

Timer Menu Options (Contd.) Off Timer/On Timer Setup Off Timer automatically switches the TV to standby mode at the preset time. On Timer automatically turns the TV on at the preset time and tunes to the specified channel. 1. Press the menu button and then use D / E button to select the Timer menu. 2. Press the G button and then use D / E button to select either Off timer or On timer. 3. Press the G button and then use D/ E button to select On. 4. Press the G button and then use D/ E button to set the hour. 5. Press the G button and then use D/ E button to set the minute. 6. For only On timer function: Press the G and then use D / E button to set the desired channel. Press the G button and then use D / E button to set the volume level at turn on. 7. Press the enter (A) button to exit. Notes • Two hours after the TV is turned on by on timer function, it will automatically revert back to standby mode unless a button has been pressed. • This function works only in standby mode. • If the same time is set for the on time and off time, only the off time operates. Timer CH. Clock Off timer On timer Sleep Auto off { { { OOnnoooooooo{ { Off { +- - : - -+AM ++++++TV+3 +Volume+30 +Move {Next+}Back Sleep Timer Setup You don't have to remember to switch the TV to standby mode before you go to sleep. The Sleep Timer automatically turns the TV off after the preset sleep time expires. Use the sleep button to select the desired sleep time. Each time you press this button, preset sleep time settings are displayed one by one as shown below. The Sleep Timer begins to count down from the number of minutes selected. - - - ¡ 10 ¡ 20 ¡ 30 ¡ 60 ¡ 90 ¡ 120 ¡ 180 ¡ 240 --Notes • After a few seconds, the desired sleep time setting will disappear and the TV turn-off function will operate automatically. • To view the remaining sleep time, press the sleep button once and the remaining sleep time will be displayed. • To cancel the Sleep Timer, select the --- setting with sleep button. 18