Zenith SL-5318-WH-C User Guide - Page 1

DualBrite® Motion Sensor Light Control Models 5312 and 5318 Requirements • The light control requires 120-volts AC. • If you want to use Manual Mode, the control must be wired through a switch. • Some codes require installation by a qualified electrician. • This product is intended for use with the enclosed gasket and with a junction box marked for use in wet locations. Model 5318 meets the ENERGY STAR® guidelines when DualBrite® function is off and ON-TIME is 1 or 5 minutes and when used with 120 W Max bulbs. Features • Turns on lighting when motion is detected. • Automatically turns lighting off. • DualBrite® Timer. • Photocell keeps the lighting off during daylight hours. • LED indicates motion was sensed (day or night). This package includes: Bulb Holders Rubber Plug OPERATION Mode: Test Auto Manual Accent On-Time 5 Seconds 1, 5, or 20 Min To Dawn* 3, 6 Hr, to Dawn Works: Day Night xx x x x * resets to Auto Mode at dawn. Note: When first turned on wait about 1 1/2 minutes for the circuitry to calibrate. TEST Put ON-TIME switch ON-TIME on the sensor bottom to TEST and the DualBrite® switch OFF. TEST 1 5 20 DualBrite® Off 3 6 Dusk to Dawn Cover Plate Sensor Light Control Plastic Hanger 2 Wire Connectors AUTO Put the ON-TIME switch in the 1, 5, or 20 minute position. ON-TIME TEST 1 5 20 MANUAL MODE Mounting Bolt Mounting Strap Manual mode only works at night because daylight returns the sensor to AUTO. 2 Shells* * Model SL-5318 only Gasket 6 Screws (3 sizes included) Flip the light switch off for one second then back on to toggle between AUTO 1 Second OFF and MANUAL MODE. then... Manual mode works only with the ON-TIME switch in the 1, 5, or 20 position. ... back on. © 2008 HeathCo LLC 595-5731-08