Zenith SL-5408-WH User Guide - Page 3

TEST AND ADJUSTMENT ❒ Turn on the circuit breaker and light switch. ❒ Turn the SENSITIVITY (SENS) control to the mid posi- tion and the ON-TIME control to the TEST position. NOTE: Sensor has a 1 1/2 minute warm up period before it will detect motion. When first turned on, wait 1 1/2 minutes. ON-TIME 10 5 1 TEST SENS MIN MAX Bottom of Sensor ❒ Loosen the clamp screw in the sensor ball joint and gently rotate the sensor. Clamp Screw ❒ Walk through the coverage area noting where you are when the lights turn on. Move the sensor head up, down, or sideways to change the coverage area. Keep the sensor at least 1" (2.5 cm) away from the lamps. ❒ Adjust the SENSITIVITY as needed. Too much sensitivity may increase false triggering. Ball Joint Aim Sensor Down for Short Coverage ❒ Secure the sensor head by tightening the clamp screw. Do not overtighten the screw. ❒ Set the amount of TIME you Aim Sensor Higher for Long Coverage want the lights to stay on after motion is detected (1, 5, or 10 minutes). Avoid aiming the control at: • Objects that change temperature rapidly, such as heating vents and air conditioners. These heat sources could cause false triggering. • Areas where pets or traffic may trigger the control. • Nearby large, light-colored objects reflecting light may trigger the shut-off feature. Do not point other lights at the sensor. 8 ft. (2.4 m) 110° Warning - Risk of fire. Do not aim the lamps at a combustible surface within 3 ft. (1 m). SPECIFICATIONS Range Up to 60 ft. (18.3 m) [varies with surrounding temperature]. Sensing Angle Up to 110° Electrical Load Up to 300 Watt Maximum In- candescent [Up to 150 Watt maximum each lamp holder.] Power Requirements. . 120 VAC, 60 Hz Operating Modes. . . . . TEST, AUTO and MANUAL MODE Time Delay 1, 5, 10 minutes Range Adjustable 60 ft. (18.3 m) Maximum Range Maximum Coverage Angle HeathCo LLC reserves the right to discontinue products and to change specifications at any time without incurring any obligation to incorporate new features in products previously sold. The detector is most sensitive to motion across its field of view. Motion Motion Sensor Least Sensitive Most Sensitive 595-5292-19