Zenith XBR716 Owner's Manual (English) - Page 45
Troubleshooting - problems
UPC - 719192171244
View all Zenith XBR716 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 45 highlights
Troubleshooting Check the following guide for the possible cause of a problem before contacting service. Symptom No power. Cause The power cord is disconnected. Abnormal or no picture. The TV is not set to receive Recorder signal output. No sound. The playback picture is poor. Picture from external input is distorted. The Recorder does not start playback. The video cable is not connected securely. Wrong connection. The equipment connected with the audio cable is not set to receive Recorder signal output. The audio cables are not connected securely. The power of the equipment connected with the audio cable is turned off. The AUDIO options are set to the wrong position. The disc is dirty. Tape heads are dirty. Tape is a rental or was recorded on another VCR. The video signal from the external component is copy-protected. No disc is inserted. No tape is inserted. An unplayable disc is inserted. The disc is placed upside down. The disc is not placed within the guide. The disc is dirty. The Rating level is set. Video tape cannot be inserted. Is the cassette compartment empty? Correction Plug the power cord into the wall outlet securely. Select the appropriate video input mode on the TV so the picture from the Recorder appears on the TV screen. Connect the video cable into the jacks securely. Check the connection. Select the correct input mode of the audio receiver so you can listen to the sound from the Recorder. Connect the audio cable into the jacks securely. Turn on the equipment connected with the audio cable. Set the AUDIO options to the correct position. Clean the disc. Clean video heads. Use TRK (v/V) for manual tracking adjustment while tape is playing. You cannot connect via the Recorder. Connect the component directly to your TV. Insert a disc or tape. (Check that the disc or tape indicator in the display window is lit.) Insert a playable disc. (Check the disc type and Regional code.) Place the disc with the playback side down. Place the disc on the disc tray correctly inside the guide. Clean the disc. Cancel the Rating function or change the rating level. Eject the tape in. REFERENCE 45