ZyXEL ARMOR G5 User Guide - Page 34
The Web Configurator, NBG7815 User's Guide, Table 4, Settings > System > Status
View all ZyXEL ARMOR G5 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 34 highlights
Chapter 3 The Web Configurator Table 4 Settings > System > Status (Bridge Mode) (continued) LINK TAB FUNCTION USB Application SAMBA Use this screen • Set up file-sharing via the NBG7815 using Windows Explorer or the workgroup name • Configure the workgroup name and create file-sharing user accounts FTP Use this screen to set up file sharing via the NBG7815 using FTP and create user accounts. USB Media Sharing Use this screen to configure settings for media sharing. WiFi Main WiFi Use this screen to enable the wireless LAN and configure wireless LAN and wireless security settings. MAC Filter Use the MAC filter screen to configure the NBG7815 to block access to devices or block the devices from accessing the NBG7815. WPS Use this screen to configure WPS. Scheduling Use this screen to schedule the times the Wireless LAN is enabled. LAN LAN IP Use this screen to configure the NBG7815's LAN IP address and subnet mask. Use this screen to configure the IPv6 address for the NBG7815 on the LAN. System Status General Setting Remote Access Maintenance Operating Mode Logs Use this screen to enable the NBG7815's DHCP server. Use this screen to view the basic information of the NBG7815 Use this screen to change password or to set the timeout period of the management session. Use this screen to enable remote assistant. Use this screen to upload firmware, reboot the NBG7815 without turning the power off or reset the NBG7815 to factory default. Use this screen to select whether your device acts as a router, or a bridge. Use this screen to view the list of activities recorded by your NBG7815. NBG7815 User's Guide 34