ZyXEL ES3500-24 User Guide - Page 253
Advanced Application, PPPoE > Intermediate Agent
View all ZyXEL ES3500-24 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 253 highlights
Chapter 31 PPPoE Click Advanced Application > PPPoE > Intermediate Agent in the navigation panel to display the screen as shown. Figure 144 Advanced Application > PPPoE > Intermediate Agent The following table describes the labels in this screen. Table 104 Advanced Application > PPPoE > Intermediate Agent LABEL Active access-nodeidentifier circuit-id DESCRIPTION Select this option to enable the PPPoE intermediate agent globally on the Switch. Enter up to 20 ASCII characters to identify the PPPoE intermediate agent. Hyphens (-) and spaces are also allowed. The default is the Switch's host name. Use this section to configure the Circuit ID field in the PADI and PADR packets. The Circuit ID you configure for a specific port or for a specific VLAN on a port has priority over this. Active The Circuit ID you configure for a specific port (in the Advanced Application > PPPoE > Intermediate Agent > Port screen) or for a specific VLAN on a port (in the Advanced Application > PPPoE > Intermediate Agent > Port > VLAN screen) has priority over this. That means, if you also want to configure PPPoE IA Per-Port or Per-Port Per-VLAN setting, leave the fields here empty and configure circuit-id and remote-id in the Per-Port or Per-Port Per-VLAN screen. Select this option to have the Switch add the user-defined identifier string and variables (specified in the option field) to PADI or PADR packets from PPPoE clients. identifierstring option delimiter If you leave this option unselected and do not configure any Circuit ID string (using CLI commands) on the Switch, the Switch will use the string specified in the access-nodeidentifier field. Specify a string that the Switch adds in the Agent Circuit ID sub-option. You can enter up to 53 ASCII characters. Spaces are allowed. Select the variables that you want the Switch to generate and add in the Agent Circuit ID sub-option. The variable options include sp, sv, pv and spv which indicate combinations of slot-port, slot-VLAN, port-VLAN and slot-port-VLAN respectively. The Switch enters a zero into the PADI and PADR packets for the slot value. Select a delimiter to separate the identifier-string, slot ID, port number and/or VLAN ID from each other. You can use a pound key (#), semi-colon (;), period (.), comma (,), forward slash (/) or space. ES3500 Series User's Guide 253