ZyXEL G-220 v2 User Guide - Page 64
Infrastructure, WPA-PSK, Ad-Hoc, DISABLE, Table 13
View all ZyXEL G-220 v2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 64 highlights
ZyXEL G-220 v2 User's Guide Figure 37 Station Mode: Profile: Select a Channel The following table describes the labels in this screen. Table 13 Station Mode: Profile: Select a Channel LABEL DESCRIPTION Wireless Settings Channel Wireless Mode Select a channel number from the drop-down list box. To associate to an ad-hoc network, you must use the same channel as the peer computer. Select Mixed Mode to have the G-220 v2 connect to either an IEEE 802.11g or IEEE 802.11b wireless device. Select G Only to have the G-220 v2 connect to an IEEE 802.11g wireless device only and vice versa. Select B Only to have the G-220 v2 connect to an IEEE 802.11b wireless device only and vice versa. • If you select Infrastructure network type in the first screen, select WEP, WPA, WPA2, WPA-PSK, WPA2-PSK or 802.1x from the drop-down list box to enable data encryption. If you select Ad-Hoc network type in the first screen, you can only use WEP encryption method. Otherwise, select DISABLE to allow the G-220 v2 to communicate with the access points or other peer wireless computers without any data encryption. 64 Chapter 4 Wireless Station Mode Configuration