ZyXEL GS1910-48 User Guide - Page 20
Console Port, 3.2 Rear Panel, Console Port - 48hp
View all ZyXEL GS1910-48 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 20 highlights
Chapter 3 Hardware Overview 2 Pull the transceiver out of the slot. Figure 17 Transceiver Removal Example 3.1.4 Console Port For local management, you can use a computer with terminal emulation software configured to the following parameters: • VT100 terminal emulation • 115200 bps • No parity, 8 data bits, 1 stop bit • No flow control Connect the male 9-pin end of the RS-232 console cable to the console port of the Switch. Connect the female end to a serial port (COM1, COM2 or other COM port) of your computer. 3.2 Rear Panel The following figure shows the rear panel of the Switch. The rear panel contains a connector for the power receptacle. The GS1910-48 and GS1910-48HP also have a console port on the rear panel. The XGS1910-48 has one console port and two SFP+ slots on the rear panel. Figure 18 Rear Panel: GS1910-24 20 GS1910/XGS1910 Series User's Guide