ZyXEL GS1910-48HP User Guide - Page 67
After the Switch restarts, you can use the default user name and password to log in.
View all ZyXEL GS1910-48HP manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 67 highlights
Chapter 5 Tutorials 5 After the Switch restarts, you can use the default user name and password to log in. >+M25PXX : Init device with JEDEC ID 0xC22018. Jaguar-1 board detected (VSC7460 Rev. B). RedBoot(tm) bootstrap and debug environment [ROMRAM] Non-certified release, version 1_12_2-customized-z-XGS - built 19:04:36, Feb 8 2012 Copyright (C) 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009 Free Software Foundation, Inc. RedBoot is free software, covered by the eCos license, derived from the GNU General Public License. You are welcome to change it and/or distribute copies of it under certain conditions. Under the license terms, RedBoot's source code and full license terms must have been made available to you. Redboot comes with ABSOLUTELY NO WARRANTY. Platform: VCore-III (MIPS32 24KEc) JAGUAR RAM: 0x80000000-0x88000000 [0x800214d8-0x87fe1000 available] FLASH: 0x40000000-0x40ffffff, 256 x 0x10000 blocks == Executing boot script in 3.000 seconds - enter ^C to abort ^C RedBoot> default ... Erase from 0x40080000-0x4017ffff RedBoot> reset +M25PXX : Init device with JEDEC ID 0xC22018. Jaguar-1 board detected (VSC7460 Rev. B). RedBoot(tm) bootstrap and debug environment [ROMRAM] Non-certified release, version 1_12_2-customized-z-XGS - built 19:04:36, Feb 8 2012 Copyright (C) 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009 Free Software Foundation, Inc. RedBoot is free software, covered by the eCos license, derived from the GNU General Public License. You are welcome to change it and/or distribute copies of it under certain conditions. Under the license terms, RedBoot's source code and full license terms must have been made available to you. Redboot comes with ABSOLUTELY NO WARRANTY. Platform: VCore-III (MIPS32 24KEc) JAGUAR RAM: 0x80000000-0x88000000 [0x800214d8-0x87fe1000 available] FLASH: 0x40000000-0x40ffffff, 256 x 0x10000 blocks == Executing boot script in 3.000 seconds - enter ^C to abort RedBoot> diag -a Hardware self-test: ... Passed IS0 TCAM self-test: ... Passed IS1 TCAM self-test: ... Passed IS2 TCAM self-test: ... Passed ES0 TCAM self-test: ... Passed L3 TCAM self-test: ... Passed DDR SDRAM: Testing [0x800214d8-0x87fe1000] - Zero Sweep Done DDR SDRAM: Testing [0x800214d8-0x87fe1000] - Write Sweep ...Done DDR SDRAM: Testing [0x800214d8-0x87fe1000] - Read Sweep ...Done 3 tests completed successfully. RedBoot> fis load -d managed Image loaded from 0x80040000-0x806a4d20 RedBoot> go Username: GS1910/XGS1910 Series User's Guide 67