ZyXEL GS2200-48 User Guide - Page 130
Bandwidth Control Setup
View all ZyXEL GS2200-48 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 130 highlights
Chapter 14 Bandwidth Control 14.2 Bandwidth Control Setup Click Advanced Application > Bandwidth Control in the navigation panel to bring up the screen as shown next. Figure 82 Advanced Application > Bandwidth Control The following table describes the related labels in this screen. Table 37 Advanced Application > Bandwidth Control LABEL Active Port * DESCRIPTION Select this check box to enable bandwidth control on the Switch. This field displays the port number. Settings in this row apply to all ports. Use this row only if you want to make some settings the same for all ports. Use this row first to set the common settings and then make adjustments on a port-by-port basis. Active Ingress Rate Note: Changes in this row are copied to all the ports as soon as you make them. Select this check box to activate ingress rate limits on this port. Specify the maximum bandwidth allowed in kilobits per second (Kbps) for the incoming traffic flow on a port. Active Egress Rate Note: Ingress rate bandwidth control applies to layer 2 traffic only. Select this check box to activate egress rate limits on this port. Specify the maximum bandwidth allowed in kilobits per second (Kbps) for the out-going traffic flow on a port. 130 GS2200-8/24 User's Guide