ZyXEL IES-1248-51V User Guide - Page 562

Chapter 69 Firmware and Configuration File Maintenance This is a sample from a FTP session to transfer the computer file firmware.bin to the IES-1248-51V. Figure 257 FTP Get Configuration File Example ftp> get config-0 config.txt This is a sample from a FTP session to transfer the IES-1248-51V's current configuration file (including the configuration files of all the IES-1248-51V) to the computer file config.txt. If your FTP client does not allow you to have a destination filename different than the source, you will need to rename them as the IES-1248-51V only recognizes "config-0" and "ras". Be sure you keep unaltered copies of the files for later use. The following table is a summary. Please note that the internal filename refers to the filename on the IES-1248-51V and the external filename refers to the filename not on the IES-1248-51V, that is, on your computer, local network or FTP site and so the name (but not the extension) may vary. After uploading new firmware, use the sys version command on the IES-1248-51V to confirm that you have uploaded the correct firmware version. Table 215 Filename Conventions FILE TYPE INTERNAL NAME Configuration File config-0 EXTERNAL NAME *.dat Firmware ras *.bin DESCRIPTION This is the configuration filename for the IES-1248-51V. This is the Operating System firmware on the IES-1248-51V. 69.3 Editable Configuration File The configuration file can be downloaded as a plain-text (ASCII) file. Edits to the configuration can be made to this file before it is uploaded again to the IES-124851V. Note: You can change the ".dat" file to a ".txt" file and still upload it back to the IES1248-51V. Note: Do not upload any invalid files to the IES-1248-51V's configuration file, as it may permanently damage your IES-1248-51V. 562 IES-1248-51V User's Guide