ZyXEL NBG318S v2 User Guide - Page 174
Bandwidth Management Monitor
View all ZyXEL NBG318S v2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 174 highlights
Chapter 17 Bandwidth Management Figure 94 Management > Bandwidth MGMT > Advanced: User-defined Service Rule Configuration The following table describes the labels in this screen Table 69 Management > Bandwidth MGMT > Advanced: User-defined Service Rule Configuration LABEL BW Budget Destination Address Destination Subnet Netmask Destination Port Source Address Source Subnet Netmask Source Port Protocol OK Cancel DESCRIPTION Select Maximum Bandwidth or Minimum Bandwidth and specify the maximum or minimum bandwidth allowed for the rule in kilobits per second. Enter the destination IP address in dotted decimal notation. Enter the destination subnet mask. This field is N/A if you do not specify a Destination Address. Refer to the appendices for more information on IP subnetting. Enter the port number of the destination. See Appendix F on page 287 for some common services and port numbers. Enter the source IP address in dotted decimal notation. Enter the destination subnet mask. This field is N/A if you do not specify a Source Address. Refer to the appendices for more information on IP subnetting. Enter the port number of the source. See Appendix F on page 287 for some common services and port numbers. Select the protocol (TCP or UDP) or select User defined and enter the protocol (service type) number. Click OK to save your customized settings. Click Cancel to exit this screen without saving. 17.9 Bandwidth Management Monitor Click Management > Bandwidth MGMT > Monitor to open the bandwidth management Monitor screen. View the bandwidth usage of the WAN configured bandwidth rules. This is also shown as bandwidth usage over the bandwidth budget for each rule. The gray section of the bar represents the percentage of unused bandwidth and the blue color represents the percentage of bandwidth in use. 174 NBG318S User's Guide