ZyXEL P-153 User Guide - Page 109
Table 6-3 contains the instructions on how to con the Edit IP Static Route Menu.
View all ZyXEL P-153 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 109 highlights
Prestige 153/153X WAN Bridge/Routers Table 6-3 contains the instructions on how to configure the Edit IP Static Route Menu. Table 6-3. Edit IPX Static Route Menu Fields Field Description Server Name In this field, enter the name of the server. This must be the exact name configured in the NetWare server. Network # This field contains the internal network number of the remote server that you wish to access. [00000000] or [FFFFFFFF] are reserved. Node # This field contains the address of the node on which the server resides. If you are using a Novell IPX implementation, this value is [000000000001]. Socket # This field contains the socket number on which the server will receive service requests. The default for this field is hex [0451]. Type # This field identifies the type of service the server provides. The default for this field is hex [0004]. Gateway Node In this field, enter the number of the remote node that is the gateway for this static route. Hop Count and These two fields have the same meaning as those in the Ethernet setup. Tick Count Once you have completed filling in the menu, press [Enter] at the message [Press ENTER to Confirm...] to save your configuration, or press [Esc] to cancel to cancel. IPX Configuration 6-11