ZyXEL P-2302R User Guide - Page 31
Resetting the ZyXEL Device, 6.2 Setting Up Your Computer’s IP Address, 2.1 Windows NT/2000/XP
View all ZyXEL P-2302R manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 31 highlights
P-2301/2R-P1C / P-2301RL-P1C User's Guide 6.1 Resetting the ZyXEL Device This changes all the ZyXEL Device's settings to their original values. You have to make all of your changes again. See section 1 on page 2 for information on default settings. " Make a note of your settings before you reset the ZyXEL Device. To reset the ZyXEL Device, 1 Press the RESET button until the POWER light starts to blink. (This usually takes ten seconds or less.) 2 Release the RESET button. 6.2 Setting Up Your Computer's IP Address " Follow these instructions only if you are following a suggestion in Troubleshooting. This section shows you how to set up your computer to automatically get an IP address from the ZyXEL Device. 6.2.1 Windows NT/2000/XP 1 In Windows XP, click Start > Control Panel. In Windows 2000/NT, click Start > Settings > Control Panel. 31