ZyXEL P-660H-61 User Guide - Page 221
The Telnet Screen
View all ZyXEL P-660H-61 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 221 highlights
Chapter 18 Remote Management 18.2.1 Configuring the WWW Screen Click Advanced > Remote MGMT to display the WWW screen. Figure 110 Advanced > Remote MGMT > WWW The following table describes the labels in this screen. Table 81 Advanced > Remote Management > WWW LABEL DESCRIPTION Server Port This displays the service port number for accessing the ZyXEL Device. If the number is grayed out, it is not editable. Server Access Select the interface(s) through which a computer may access the ZyXEL Device using this service. Secured Client IP Address Apply Cancel Note: It is recommended if you are allowing WAN access even temporarily to change the default password (in Maintenance > System > General). To allow access from the WAN, you will need to configure a WAN to Router firewall rule. See Section 4.8 on page 60 for information on configuring firewall rules. A secured client is a "trusted" computer that is allowed to communicate with the ZyXEL Device using this service. Select All to allow any computer to access the ZyXEL Device using this service. Choose Selected to just allow the computer with the IP address that you specify to access the ZyXEL Device using this service. Click this to save your changes. Click this to restore your previously saved settings. 18.3 The Telnet Screen You can use Telnet to access the ZyXEL Device's command line interface. Specify which interfaces allow Telnet access and from which IP address the access can come. ADSL Router Series User's Guide 221