ZyXEL P-660H-T1 v3s User Guide - Page 95
Table 20, Network > LAN > Client List
View all ZyXEL P-660H-T1 v3s manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 95 highlights
Chapter 7 LAN Setup Use this screen to change your P-660H-T1v3s's static DHCP settings. Click Network > LAN > Client List to open the following screen. Figure 31 Network > LAN > Client List The following table describes the labels in this screen. Table 20 Network > LAN > Client List LABEL IP Address MAC Address Add # Status Host Name IP Address MAC Address DESCRIPTION Enter the IP address that you want to assign to the computer on your LAN with the MAC address that you will also specify. Enter the MAC address of a computer on your LAN. Click this to add a static DHCP entry. This is the index number of the static IP table entry (row). This field displays whether the client is connected to the P-660H-T1v3s. This field displays the computer host name. This field displays the IP address relative to the # field listed above. The MAC (Media Access Control) or Ethernet address on a LAN (Local Area Network) is unique to your computer (six pairs of hexadecimal notation). Reserve Modify Apply Cancel Refresh A network interface card such as an Ethernet adapter has a hardwired address that is assigned at the factory. This address follows an industry standard that ensures no other adapter has a similar address. Select the check box in the heading row to automatically select all check boxes or select the check box(es) in each entry to have the P660H-T1v3s always assign the selected entry(ies)'s IP address(es) to the corresponding MAC address(es) (and host name(s)). You can select up to 10 entries in this table. Click the modify icon to have the IP address field editable and change it. Click this to save your changes. Click this to restore your previously saved settings. Click this to reload the DHCP table. P-660H-T1v3s User's Guide 95