ZyXEL P-660N-T1A User Guide - Page 228
SSH Example
View all ZyXEL P-660N-T1A manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 228 highlights
Chapter 18 Remote Management The following table describes the labels in this screen. Table 87 Advanced > Remote Management > SSH LABEL DESCRIPTION Server Port This displays the service port number for accessing the ZyXEL Device. If the number is grayed out, it is not editable. Server Access Select the interface(s) through which a computer may access the ZyXEL Device using this service. Secured Client IP Address Apply Cancel Note: It is recommended if you are allowing WAN access even temporarily to change the default password (in Maintenance > System > General). To allow access from the WAN, you will need to configure a WAN to Router firewall rule. See Section 4.8 on page 60 for information on configuring firewall rules. A secured client is a "trusted" computer that is allowed to communicate with the ZyXEL Device using this service. Select All to allow any computer to access the ZyXEL Device using this service. Choose Selected to just allow the computer with the IP address that you specify to access the ZyXEL Device using this service. Click this to save your changes. Click this to restore your previously saved settings. 18.8.1 SSH Example This section shows an example using a graphical interface SSH client program to remotely access the ZyXEL device. The configuration and connection steps are similar for most SSH client programs. Refer to your SSH client program user's guide. 1 Enter the IP address and port number. Select SSH. 228 ADSL Router Series User's Guide