ZyXEL P-660R-T1 v3 Quick Start Guide
ZyXEL P-660R-T1 v3 Manual
 |
View all ZyXEL P-660R-T1 v3 manuals
Add to My Manuals
Save this manual to your list of manuals |
ZyXEL P-660R-T1 v3 manual content summary:
- ZyXEL P-660R-T1 v3 | Quick Start Guide - Page 1
P-660R-T1 v3 QUICK START GUIDE ADSL2+ Access Router Firmware v3.40 Edition 1, 09/2008 DEFAULT LOGIN DETAILS IP Address: http://192.168.1.1 Username: admin Password: 1234 www.zyxel.com Copyright C 2008 ZyXEL Communications Corporation - ZyXEL P-660R-T1 v3 | Quick Start Guide - Page 2
Front and Rear Panels POWER LED ETHERNET LED DSL INTERNET LED LED POWER ON/OFF RESET ETHERNET PORT DSL PORT 2 - ZyXEL P-660R-T1 v3 | Quick Start Guide - Page 3
Introduction ENGLISH P-660R-T1 v3 The P-660R-T1 v3 is a high performance ADSL2+ router which combines high-speed Internet access and a firewall capability. How It Works a DSL b A computer can connect to the P-660R-T1 v3 using an Ethernet cable (a). The P-660R-T1 v3 then connects to the - ZyXEL P-660R-T1 v3 | Quick Start Guide - Page 4
before you set up your P-660R-T1 v3. • Internet access - account information provided by your ISP, such as username, password, and so on. • Internet Explorer 6.0 or later or Netscape Navigator 7.0 or later, with JavaScript enabled. See the User's Guide for all configuration details. To read the User - ZyXEL P-660R-T1 v3 | Quick Start Guide - Page 5
a telephone jack. 2. ETHERNET: Use an Ethernet cable to connect a computer to this port for initial configuration and/or Internet access. 3. POWER: Use the power adaptor provided with your P-660R-T1 v3 to connect an appropriate power source to this socket. 4. Push the power switch to the on position - ZyXEL P-660R-T1 v3 | Quick Start Guide - Page 6
LEDs (lights) on the top panel of the P-660R-T1 v3. • The POWER light blinks during start-up and is green once the P-660RT1 v3 is ready. • The ETHERNET light turns on if the ETHERNET port is properly connected. The light blinks when the P-660R-T1 v3 is sending or receiving data through the ETHERNET - ZyXEL P-660R-T1 v3 | Quick Start Guide - Page 7
1. Open your browser and enter http://192.168.1.1 (the P-660R-T1 v3's default IP address) as the address. 2. Enter the user name (admin by default) and password (1234 by default). Click OK. If the login screen does not display, make sure you allow web browser pop-up windows, JavaScripts and Java - ZyXEL P-660R-T1 v3 | Quick Start Guide - Page 8
ENGLISH 3. In the main screen, click Quick Start > Quick Start from the navigation panel to access the setup wizard. 4. Click RUN WIZARD to start configuring the Internet connection. 8 - ZyXEL P-660R-T1 v3 | Quick Start Guide - Page 9
ENGLISH P-660R-T1 v3 5. The wizard summarizes the steps required to set up your Internet connection. Click NEXT. 6. Change your admin password in the following screen. Click NEXT. 7. Select your time zone from the drop-down list box and click NEXT. 9 - ZyXEL P-660R-T1 v3 | Quick Start Guide - Page 10
ENGLISH 8. Select the type of ISP connection and click NEXT. Enter the information provided by your ISP. Keep the default settings if your ISP did not provide some information. Enter the Internet access information exactly as given to you by your ISP in each wizard - ZyXEL P-660R-T1 v3 | Quick Start Guide - Page 11
ENGLISH P-660R-T1 v3 Congratulations! You have created an Internet connection through your P660R-T1 v3. You may configure security settings such as firewall or content filtering in the web configurator to protect your network. See the User's Guide for details. 11 - ZyXEL P-660R-T1 v3 | Quick Start Guide - Page 12
ENGLISH 12
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
-
9
-
10
-
11
-
12
 |
 |
www.zyxel.com
QUICK START GUIDE
P-660R-T1 v3
ADSL2+ Access Router
Firmware v3.40
Edition 1, 09/2008
DEFAULT LOGIN DETAILS
IP Address:
Username:
admin
Password:
1234
Copyright
2008 ZyXEL Communications Corporation
C