ZyXEL P-660RU-T1 v3 Quick Start Guide - Page 3
Connect the Hardware - v3s
 |
View all ZyXEL P-660RU-T1 v3 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 3 highlights
P-660RU-Tx v3 Connect the Hardware 1. DSL: Use a telephone wire to connect this port to a telephone jack. 2. ETHERNET: Use an Ethernet cable to connect this port to your computer's Ethernet port. 3. USB: Use a USB cable to connect this port to your computer's USB port. 4. POWER: Use the included power adaptor to connect an appropriate power source to this socket. Push the power switch to the on position. Do not connect the same computer to both the USB and Ethernet ports on the P-660RU-Tx v3. 3
-
1 -
2 -
3 -
4 -
5 -
6
 |
 |
P-660RU-Tx v3
3
Connect the Hardware
1.
DSL
: Use a telephone wire to connect this port to a
telephone jack.
2.
ETHERNET
: Use an Ethernet cable to connect this port to
your computer’s Ethernet port.
3.
USB
: Use a USB cable to connect this port to your
computer’s USB port.
4.
POWER
: Use the included power adaptor to connect an
appropriate power source to this socket. Push the power
switch to the on position.
Do not connect the same computer to both the USB
and Ethernet ports on the P-660RU-Tx v3.