ZyXEL P-793H User Guide - Page 397
Configuration File Upload
View all ZyXEL P-793H manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 397 highlights
Chapter 35 Firmware and Configuration File Maintenance When you telnet into the P-793H v2, you will see the following screens for uploading firmware and the configuration file using FTP. Figure 216 Menu 24.7.1: System Maintenance - Upload System Firmware Menu 24.7.1 - System Maintenance - Upload System Firmware To upload the system firmware, follow the procedure below: 1. Launch the FTP client on your workstation. 2. Type "open" and the IP address of your system. Then type "root" and SMT password as requested. 3. Type "put firmwarefilename ras" where "firmwarefilename" is the name of your firmware upgrade file on your workstation and "ras" is the remote file name on the system. 4. The system reboots automatically after a successful firmware upload. For details on FTP commands, please consult the documentation of your FTP client program. For details on uploading system firmware using TFTP (note that you must remain on this menu to upload system firmware using TFTP), please see your manual. 35.5.2 Configuration File Upload You see the following screen when you telnet into menu 24.7.2. Figure 217 Menu 24.7.2: System Maintenance - Upload System Configuration File Menu 24.7.2 - System Maintenance - Upload System Configuration File To upload the system configuration file, follow the procedure below: 1. Launch the FTP client on your workstation. 2. Type "open" and the IP address of your system. Then type "root" and SMT password as requested. 3. Type "put configurationfilename rom-0" where "configurationfilename" is the name of your system configuration file on your workstation, which will be transferred to the "rom-0" file on the system. 4. The system reboots automatically after the upload system configuration file process is complete. For details on FTP commands, please consult the documentation of your FTP client program. For details on uploading system firmware using TFTP (note that you must remain on this menu to upload system firmware using TFTP), please see your manual. To upload the firmware and the configuration file, follow these examples P-793H v2 User's Guide 397