ZyXEL P-870HN-51b User Guide - Page 183
Static Route Edit, Table 61
View all ZyXEL P-870HN-51b manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 183 highlights
Chapter 12 Static Route 12.2.1 Static Route Edit Click the Add button in the Static Route screen. Use this screen to configure the required information for a static route. Figure 94 Static Route: Add Figure 95 Static Route: Add: IPv6 The following table describes the labels in these screens. Table 61 Static Route: Add LABEL DESCRIPTION IP Version Select the IP version to use for this static route's traffic. Destination IP Address This parameter specifies the IP network address of the final destination. Routing is always based on network number. If you need to specify a route to a single host, use a subnet mask of 255.255.255.255 in the subnet mask field to force the network number to be identical to the host ID. Destination IP address/prefix length If IPv6 is selected as the IP version, this parameter specifies the IPv6 network address and prefix length of the final destination. Routing is always based on network number. If you need to specify a route to a single host, use the prefix length of 128 to force the network number to be identical to the host ID. IP Subnet Mask Enter the IP subnet mask here. Use Interface Select a WAN interface through which the traffic is sent. You must have the WAN interface(s) already configured in the WAN screens. Use Gateway IP Address Select this option and enter the IP address of the next-hop gateway. The gateway is a router or switch on the same segment as your Device's interface(s). The gateway helps forward packets to their destinations. P-870HN-5xb User's Guide 183