ZyXEL PLA5205 User Guide - Page 15
Removing a Device from a Powerline Network, A OR B OR C
View all ZyXEL PLA5205 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 15 highlights
Chapter 2 The RESET/ENCRYPT Button 4 Press the RESET/ENCRYPT button on both powerline devices (A and D, B and D or C and D) for 0.5 to 3 seconds to add powerline device D. This must be done within 2 minutes (120 seconds) of pressing the RESET/ENCRYPT button on the PLA. Figure 4 Adding More Powerline Adapters to Your Network B A A OR B A OR B OR C C D This sets up your powerline network between your powerline devices. 2.3 Removing a Device from a Powerline Network Suppose you want to remove PLAs (C) and (D) from the following powerline network. Figure 5 Removing Devices From an Existing Powerline Network B A C D 1 Press the RESET/ENCRYPT button on powerline device C for 5 to 8 seconds and then release it. This disconnects C from the current network. 2 Press the RESET/ENCRYPT button on powerline device D for 5 to 8 seconds and then release it. This disconnects D from the current network. PLA Series User's Guide 15