ZyXEL U-336R User Guide - Page 88
Class 2.0 Command Set
View all ZyXEL U-336R manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 88 highlights
Response Value +FNSF:"HEX string" +FNSS:"HEX string" +FPOLL +FPTS:n +FTSI:"string" +FVOICE Function and Description Report the non-standard facilities frame response. Report the non-standard setup frame response. Remote polling indication. Receive page transfer status response; refer to +FPTS=n command. Report remote ID response TSI. Transition to Voice response. Class 2 Flow Control Flow control is necessary to match the DTE-DCE data rate to the line signaling rate while transmitting or receiving Group 3 (T.4) data. In Class 2 fax mode, both hardware (RTS/CTS) and software (XON/XOFF) flow control are enabled. Class 2.0 Command Set Command Syntax += +=? +? Description Execute a command or set a parameter. Read permissible settings. Read the current setting. Supported Commands Command Value +FAA=n n=0 n=1 +FBO=n n=0 n=1 Description Auto-answer mode parameter: DCE answers as set by +FCLASS. DCE answers and auto-determines call type. Phase C data bit order: Select direct bit order. Select reversed bit order in receiving 74 Fax Operation