ZyXEL VMG1312-B30A User Guide - Page 93
Table 11, Label, Description
View all ZyXEL VMG1312-B30A manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 93 highlights
Chapter 6 Broadband Note: The actual data rate you obtain varies depending the 3G card you use, the signal strength to the service provider's base station, and so on. Figure 23 Network Setting > Broadband > 3G Backup The following table describes the labels in this screen. Table 11 Network Setting > Broadband > 3G Backup LABEL DESCRIPTION General 3G Backup Select Enable to have the Device use the 3G connection as your WAN or a backup when the wired WAN connection fails. Ping Check Select Enable if you want the Device to ping check the connection status of your WAN. You can configure the frequency of the ping check and number of consecutive failures before triggering 3G backup. Check Cycle Enter the frequency of the ping check in this field. Consecutive Fail Enter how many consecutive failures are required before 3G backup is triggered. Ping Default Gateway Select this to have the Device ping the WAN interface's default gateway IP address. Ping the Host Select this to have the Device ping the particular host name or IP address you typed in this field. 3G Connection Settings Card description This field displays the manufacturer and model name of your 3G card if you inserted one in the Device. Otherwise, it displays N/A. VMG1312-B Series User's Guide 93