ZyXEL VSG1432 User Guide - Page 157

Chapter 10 Quality of Service (QoS) 10.5 The Class Setup Screen Use this screen to add, edit or delete QoS classifiers. A classifier groups traffic into data flows according to specific criteria such as the source address, destination address, source port number, destination port number or incoming interface. For example, you can configure a classifier to select traffic from the same protocol port (such as Telnet) to form a flow. You can give different priorities to traffic that the ZyXEL Device forwards out through the WAN interface. Give high priority to voice and video to make them run more smoothly. Similarly, give low priority to many large file downloads so that they do not reduce the quality of other applications. Click Network Settings > QoS > Class Setup to open the following screen. Figure 55 Network Settings > QoS > Class Setup The following table describes the labels in this screen. Table 33 Network Settings > QoS > Class Setup LABEL DESCRIPTION Add new Classifier Click this to create a new classifier. # This is the index number of the entry. Status This field displays whether the classifier is active or not. A yellow bulb signifies that this classifier is active. A gray bulb signifies that this classifier is not active. Class Name This is the name of the classifier. Classification Criteria This shows criteria specified in this classifier, for example the interface from which traffic of this class should come and the source MAC address of traffic that matches this classifier. DSCP Mark This is the DSCP number added to traffic of this classifier. 802.1P Mark This is the IEEE 802.1p priority level assigned to traffic of this classifier. VLAN ID Tag This is the VLAN ID number assigned to traffic of this classifier. VSG1432-B101 Series User's Guide 157