ZyXEL WAC500 User Guide - Page 43
Zyxel Device Models With Multiple LEDs
View all ZyXEL WAC500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 43 highlights
Chapter 3 Hardware Table 12 WAC500, WAC500H, NWA1123ACv3, NWA110AX, WAX510D and WAX650S LED (continued) COLOR STATUS DESCRIPTION Green Steady On The Zyxel Device is ready for use, the Zyxel Device's wireless interface is activated, and/or wireless clients are connected to the Zyxel Device in full power mode (see Table 14 on page 44). Amber Steady On The Zyxel Device is ready for use, the Zyxel Device's wireless interface is activated, and/or wireless clients are connected to the Zyxel Device in limited power mode (see Table 14 on page 44). Bright Blue Steady On The Zyxel Device's wireless interface is activated, but there are no wireless clients connected when it is in full power mode (see Table 14 on page 44). White Steady On The Zyxel Device's wireless interface is activated, but there are no wireless clients connected when it is in limited power mode (see Table 14 on page 44). Slow Blinking (On for 100ms per second) Note: The color of the white LED may have slight differences (for example, very light purple) on different models. Locator LED is on. It switches off automatically after the configured amount of time (1-60 min). Default duration is 10 minutes. Blue Red Slow Blinking (Blink for 1 time, Off for 1 second) On Fast Blinking (On for 50 milliseconds, Off for 50 milliseconds) Slow Blinking (Blink for 3 times, Off for 3 seconds) Note: The color of the white LED may have slight differences (for example, very light purple) on different models. The Zyxel Device is performing a Channel Availability Check (CAC) with Dynamic Frequency Selection (DFS) to monitor a channel for radar signals. The Zyxel Device failed to boot up or is experiencing system failure. The Zyxel Device is undergoing firmware upgrade. The Uplink port of the Zyxel Device in standalone mode is disconnected. 3.4 Zyxel Device Models With Multiple LEDs The LEDs of some Zyxel Device models can be controlled by using the suppression feature such that the LEDs stay lit (ON) or OFF after the Zyxel Device is ready. Some Zyxel Device models also has Locator LED which allows you to see the actual location of the Zyxel Device among several devices in the network. See Section 1.4 on page 18 to check which models support these features. Refer to Chapter 20 on page 180 for the LED Suppression and Locator menus in standalone mode. The following models have multiple LEDs: NWA1123-AC PRO, NWA1302-AC, WAC6103D-I, WAC5302D-S, WAC6502D-E, WAC6502D-S, WAC6503D-S. NWA/WAC/WAX Series User's Guide 43