ZyXEL ZYWALL USG 20W User Guide - Page 379

Chapter 22 Firewall • The first row allows any LAN1 computer to access the IRC service on the WAN by logging into the ZyWALL with the CEO's user name. • The second row blocks LAN1 access to the IRC service on the WAN. • The third row is the firewall's default policy of allowing all traffic from the LAN1 to go to the WAN. The rule for the CEO must come before the rule that blocks all LAN1 to WAN IRC traffic. If the rule that blocks all LAN1 to WAN IRC traffic came first, the CEO's IRC traffic would match that rule and the ZyWALL would drop it and not check any other firewall rules. 22.1.4 Firewall Rule Configuration Example The following Internet firewall rule example allows Doom players from the WAN to IP addresses 192.168.1.10 through 192.168.1.15 (Dest_1) on the LAN1. 1 Click Configuration > Firewall. In the summary of firewall rules click Add in the heading row to configure a new first entry. Remember the sequence (priority) of the rules is important since they are applied in order. Figure 228 Firewall Example: Firewall Screen 2 At the top of the screen, click Create new Object > Address. 3 The screen for configuring an address object opens. Configure it as follows and click OK. Figure 229 Firewall Example: Create an Address Object 4 Click Create new Object > Service. ZyWALL USG 20/20W User's Guide 379