ZyXEL ZyWALL ATP100 User Guide - Page 227
Configuration > Wireless > AP Management > AP Group > Add/Edit continued
View all ZyXEL ZyWALL ATP100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 227 highlights
Chapter 8 Wireless Table 88 Configuration > Wireless > AP Management > AP Group > Add/Edit (continued) LABEL DESCRIPTION # This is the index number of the SSID profile. You can associate up to eight SSID profiles with an AP radio. SSID Profile Indicates which SSID profile is associated with this radio profile. VLAN Settings Force Overwrite VLAN Config Select this to have the Zyxel Device change the AP's management VLAN to match the configuration in this screen. Management VLAN Enter a VLAN ID for this AP. ID As Native VLAN Select this option to treat this VLAN ID as a VLAN created on the Zyxel Device and not one assigned to it from outside the network. Port Settings Model Specific Setting Select the model of the managed AP to display the model-specific port and VLAN settings in the tables below. Port Setting You can activate or deactivate a non-uplink port. Edit Activate/Inactivate Double-click an entry or select it and click Edit to open a screen where you can modify the entry's settings. To turn on an entry, select it and click Activate. To turn off an entry, select it and click Inactivate. # This is the port's index number in this list. Status This displays whether or not the port is activated. Port This shows the name of the physical Ethernet port on the managed AP. PVID This shows the port's PVID. A PVID (Port VLAN ID) is a tag that adds to incoming untagged frames received on a port so that the frames are forwarded to the VLAN group that the tag defines. VLAN Configuration Use Add to create a new VLAN Configuration. Select a VLAN Configuration first to use the Edit, Remove, Activate and Inactivate buttons. # Status This is the VLAN's index number in this list. This displays whether or not the VLAN is activated. Name VID This shows the name of the VLAN. This shows the VLAN ID number. Member This field displays the Ethernet port(s) that is a member of this VLAN. Load Balancing Setting Enable Load Balancing Select this to enable load balancing on the Zyxel Device. Use this section to configure wireless network traffic load balancing between the managed APs in this group. Note: Load balancing is not supported on the radio which is working in root AP or repeater AP mode. ZyWALL ATP Series User's Guide 227