ZyXEL omni.net LCD Plus User Guide - Page 52
DCD ON/OFF sequence follows UNIX standard, DCD, Enable Selective Reject in V.42. Default
View all ZyXEL omni.net LCD Plus manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 52 highlights
Omni 56K Plus Series User's Guide Table 4-16 Extended S-Registers "ATSn=x" COMMAND BIT DEC HEX FUNCTION AND DESCRIPTION REF. 7 0 0 Select V.22 for 1200 bps communication B0* 128 80 Select Bell 212A for 1200 bps communication B1 S29= 0-49 0-31 Set default dial phone number pointer, use AT&Zn=s to +000 *D store phone numbers in EEPROM. S31= 0-255 0-FF Holds the ASCII decimal value of the XON . +017 S32= 0-255 0-FF Holds the ASCII decimal value of the XOFF. +019 S35= bit dec hex Bit mapped register. +032 1 2 2 Disable aborting from terminal during modem handshaking. 3 8 8 Add 16dB attenuation to the leased line transmission power. 5 32 20 Enable Selective Reject in V.42. (Default) * 7 128 80 Enable extended numerical result codes from 50-65 V0 when an error corrected connection is made. Use with S23.6 ATV0. (see result code table) S38= bit Dec hex Bit mapped register. +000 0 1 1 Repeatedly dialing default number if not connected. *Dn, S29 3 0 0 CD tracks the carrier. (Default) &C0 3 8 8 DCD ON/OFF sequence follows UNIX standard, DCD &C1, ON before connect message is sent, DCD off after last S21.4 DCE response is sent. 4 16 10 Auto-mode fax receiving disabled, hang up if a fax call &N0 is received. 5 32 20 Disable MNP5 negotiation. &Kn S39= bit dec hex Bit mapped register. +032 2 4 4 Reverse the answers. Answer in originating mode. ATA 3 8 8 Class 2 Fax Bitfax compatibility: +FCON at 2400; next phase at 19200 4 16 10 Class 2 Fax mode DTE shifting: +FCON at current DTE rate, shift to 19,200 when entering into the next phase 5 32 20 Disable srambler/descrambler in V.26bis mode. * Enables compatibility with older V.26bis modems which have no such unit (Default) S40= bit dec hex Bit mapped register. +000 1 2 2 No result code is displayed in answer mode. Q2 2 4 4 Enables caller ID detection. 3 8 8 Enables type 1 ring detection. 4 16 10 Enables type 2 ring detection. 5 32 20 Enables type 3 ring detection. 4-24 Command Sets