ZyXEL omni.net USB II User Guide - Page 36
Fax command sets, 1.4 Extended AT# Command Sets, 2.1 Service Class 1 Commands
View all ZyXEL omni.net USB II manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 36 highlights
Omni 56K Plus Series User's Guide COMMAND *T *V Table 4-4 Extended AT* Command Sets OPTIONS *Q3 FUNCTION & DESCRIPTION Disconnect if signal quality is poor. Recall the last CND (Caller ID) information. Views password table. REF. S40.2 4.1.4 Extended AT# Command Sets Table 4-5 Extended AT# Command Sets COMMAND OPTIONS FUNCTION & DESCRIPTION REF. #En Modem status in escape state #E0 Disable the report of modem status in escape state #E1 Enable the report of modem status in escape state 4.2 Fax command sets 4.2.1 Service Class 1 Commands Table 4-6 Service Class 1 Commands COMMAND +FCLASS=n DESCRIPTION Service Class Identification and Control +FTS=n Stop Transmission and pauses +FRS=n Wait for Silence +FTM= Transmit Data with Carrier +FRM= Receive Data with Carrier +FTH=n Transmit HDLC Data with =3 Carrier +FRH=n Receive HDLC Data with =3 Carrier The value of parameters lists as below: VALUE n=0:Sets to modem mode n=1:Sets to Class 1 mode n=2.0:Sets to Class 2.0 mode n=8:Sets to Voice mode n=0-255 in 10 ms units. n=0-255 in 10 ms units. See table 16 See table 16 n=3 n=3 Table 4-7 The Value of Parameters VALUE 3 24 48 72 73 MODULATION V.21 ch 2 V.27ter V.27ter V.29 V.17 SPEED 300 2400 4800 7200 7200 4-8 Command Sets