eMachines D520 eMachines D720/D520 Series Service Guide - Page 112
Replacing the ODD Module
View all eMachines D520 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 112 highlights
Replacing the ODD Module 1. With the ODD tray in the eject position, replace the 2. Press the cover into the tray, bottom edge first, to ODD cover on the new ODD Module. secure. 3. Turn ODD Module around and secure bracket with 4. Slide the module in the chassis and press until the three screws. module is flush with the chassis. 5. Replace the single screw to secure the Module. 102 Chapter 3
102
Chapter 3
Replacing the ODD Module
1.
With the ODD tray in the eject position, replace the
ODD cover on the new ODD Module.
2.
Press the cover into the tray, bottom edge first, to
secure.
3.
Turn ODD Module around and secure bracket with
three screws.
4.
Slide the module in the chassis and press until the
module is flush with the chassis.
5.
Replace the single screw to secure the Module.