eMachines E15T4 User Guide - Page 9
Remove the four small screws from the back of the LCD panel. Do not discard the, four screws.
View all eMachines E15T4 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 9 highlights
Attaching the optional stand 4 Remove the screw from the neck hinge, then remove the neck from the LCD panel. Do not discard the screw. Screw 5 Place the hinge cover over the hinge. 6 Attach the hinge cover using the screw you removed from the original neck hinge. 7 Remove the four small screws from the back of the LCD panel. Do not discard the four screws. Screw Screw Screw www.gateway.com Screw 5
5
www.gateway.com
Attaching the optional stand
4
Remove the screw from the neck hinge, then remove the neck from the LCD panel.
Do not discard the screw.
5
Place the hinge cover over the hinge.
6
Attach the hinge cover using the screw you removed from the original neck hinge.
7
Remove the four small screws from the back of the LCD panel. Do not discard the
four screws.
Screw
Screw
Screw
Screw
Screw